SPM Centering and Facing Machines are most suitable for centering, chamfering and external turning of the two ends simultaneously of the bar stock, such as camshafts, crankshafts, motor-shafts, universal joint, spinders etc. ensuring perfect alignment of centres, accurate length and true end. These are available in four length capacities.
The combined centering and facing operation saves machine time, handling time and floor space. The machine has two Hydraulic operated self centering work holding vices with push button control. The cutting cycle is operated with push button on a fast approach slow feed and rapid return basis.

THE SPM centering and facing machine essentially consists of two centering and facing heads, one permanently clamped and the other adjustable for machining different length of jobs.
The spindles are supported by two taper rolled bearing at both ends in the hard chromium plated and lapped quills. As compared in the maximum quill stroke, the quill supported length is so designed to achieve maximum quill rigidity during extreme conditions. Total four speeds are provided thro”v” change pulleys. This makes the machine suitable for machining different materials of different sizes.

For standard centering and facing operations, a rgid, compact, hardened and ground tool head is provided with standard commercially available index type carbide cutter inserts and holders as well as longitudinally fine adjustable centre drill.
Depending on the application, special tool head with additional for outside turning, boring and chamfering can be supplied at extra cost.

SPM Centering and Facing Machines are most suitable for centering, chamfering and external turning of the two ends simultaneously of the bar stock, such as camshafts, crankshafts, motor-shafts, universal joint, spinders etc. ensuring perfect alignment of centres, accurate length and true end. These are available in four length capacities.
The combined centering and facing operation saves machine time, handling time and floor space. The machine has two Hydraulic operated self centering work holding vices with push button control. The cutting cycle is operated with push button on a fast approach slow feed and rapid return basis.